SHELL MORLINA B220 CIRCULATION OIL
0963183399Shell Morlina S2 B 220 is a premium quality circulating oil designed to provide outstanding oxidation and water separation protection for use in most general industrial bearing and circulating lubrication systems and certain other industrial applications where oils with extreme pressure properties are not required.
Describe
Shell Morlina S2 B is a high performance oil specially designed to provide excellent oxidation and water separation resistance for use in most industrial bearing and circulating oil system applications and certain other industrial applications where oils with extreme pressure (EP) properties are not required. It meets the Morgan and Danieli Construction Company specifications for general purpose bearing oils.
Features & Benefits of Shell Morlina S2 B 220 Circulating Oil
– Maintenance savings: Shell Morlina S2 B is formulated with a proven rust and oxidation inhibitor additive system to provide consistent protection and oil performance throughout the maintenance interval.
Reliable corrosion & wear protection
Shell Morlina S2 B helps prolong the life of bearings and circulating systems through:
Excellent water separation helps ensure that the critical oil film is maintained between loaded parts
Good air release helps to minimise foaming and damage to circulating pumps.
Helps protect against corrosion, oxidation and emulsion formation even in the presence of water.
Maintaining system efficiency
Shell Morlina S2 B is formulated with highly refined, high quality base oils to provide good water and air separation properties to ensure efficient lubrication of systems and machinery.
Main Applications of Shell Morlina S2 B 220 Circulating Oils
Circulating systems on equipment
Oil-lubricated bearings: Suitable for plain and rolling element bearings and general industrial applications.
Roll-neck bearings
Enclosed industrial gear boxes: Gear boxes subjected to low and medium loads that do not require lubricants with EP properties.
Shell Morlina S2 B 220 Circulating Oil Specifications, Approvals & Recommendations
Morgan MORGOIL® Lubricant Specification New Oil (Rev.1.1) (MORGOIL is a registered trademark of Morgan Construction Company)
Danieli Standard Oil 6.124249.F
DIN 51517-1 – type C
DIN 51517-2 – type CL
Compatibility & Miscibility of Shell Morlina S2 B 220 Circulating Oils
·Paint Compatibility: Shell Morlina S2 B is compatible with seal materials and paints normally specified for use with mineral oils.
Typical physical properties of Shell Morlina S2 B 220 Circulating Oils
| Properties | Method | Morlina S2 B 220 | ||
| ISO Viscosity Grade | ISO 3448 | 220 | ||
| Kinematic Viscosity | @400C | mm2/s | ASTM D445 | 220 |
| Kinematic Viscosity | @1000C | mm2/s | ASTM D445 | 18.3 |
| Density | @150C | kg/m3 | ISO 12185 | 891 |
| Viscosity Index | ISO 2909 | 92 | ||
| Flash Point (COC) | 0C | ISO 2592 | 280 | |
| Pour Point | 0C | ISO 3016 | -15 | |
| Rust, Distilled Water | ASTM D665A | Đạt | ||
| Emulsion Test – @820C (Unless otherwise indicated by *) | Minutes | ASTM D1401 | 20 | |
| Oxidation Control Test: TOST | Hour | ASTM D943 | 1300+ | |
| Oxidation control test: RBOT | Minute | ASTM D2272 | 400+ | |
| Foam test, Seq II | ml foam at 0/10 mins | ASTM D892 | 10/0 | |
Thank you for your interest!
For more information, please contact:
VUONG KIM PHAT TRADING AND SERVICE COMPANY LIMITED
Address: 1/88 Dai Lo BD, KP. Hoa Lan 1, Ward. Thuan Giao, TX. Thuan An, Binh Duong
Phone: 0963183399
Email: daunhotvuongkimphat@gmail.com
Website: daunhotvuongkimphat.com – visipoil.com
